Slab & Stone Works Book a consult
Overhead view of a dark workbench with a corner of veined stone slab, a tape measure, a pencil and a drafting blueprint

Knoxville, Tennessee

Every edge tells a story. Ours are written in stone.

Quartz and granite countertops for kitchens and baths. Choose your slab, choose your edge, and we handle the template, the cut and the install.

Request a fabricator consult See the slab inventory

01 — The work

Precision is not a detail. It’s the whole point.

The difference between a countertop and a piece of work is in the parts you feel with your fingertips — the profile of an edge, the line of a cutout, the way a seam disappears.

Close view of a stone countertop edge being hand-polished, water sheen on the surface
Fig. 01 Edge detail — hand polished

Edge profiles & sink cutouts

The profile you choose is the part of the stone your hand touches every day. Each edge is shaped and polished at the bench, then the sink and faucet cutouts are set to your template.

  • 01Eased & bevelA quiet, straight edge that reads clean against a modern cabinet.
  • 02Bullnose & ogeeSoftened and shaped edges for traditional kitchens and vanities.
  • 03Sink cutoutsUndermount and drop-in openings, cut and finished to the sink you supply.
  • 04Vein directionWe mark the slab with you so the movement runs the way you want it.
Fabricator guiding a router along a sink cutout in a stone countertop
Fig. 02 Sink cutout, in progress

Kitchens, vanities and the small jobs

Quartz and granite for a full kitchen or a single vanity comes off the same bench. Full-height backsplashes, waterfall returns and undermount sinks are cut, profiled and polished in the shop before anything is set.

Small work gets the same treatment. Remnant pieces left over from larger projects make laundry counters, bar tops and bath vanities possible without ordering a whole slab.

02 — Method

From template to set stone.

Four steps, in this order. Nothing gets cut until we have templated your room and you have chosen your slab.

A thin wooden template strip laid along a kitchen countertop edge with a tape measure and pencil
Fig. 03 Template on site
  1. 01

    Template

    We come to you and build a template from your cabinets, walls and cutouts. Every angle and every appliance opening is recorded before a slab is cut.

  2. 02

    Select

    Walk the slab inventory and choose your quartz or granite, then pick an edge profile at the bench. We mark the vein direction with you so the pattern reads the way you want it.

  3. 03

    Fabricate

    Slabs are cut, profiled and polished in our shop. Sink cutouts, faucet holes and edge profiles are finished by hand — this is the part that shows.

  4. 04

    Install

    We set the stone, seam it and seal it. Counters that sit flat, edges that line up, and a site we clean before we leave.

03 — On the racks

Slab inventory, quoted by the square foot.

Quartz and granite slabs, photographed as they sit on the racks. Tell us your dimensions and we will quote the slab and the fabrication together.

Ask about a slab
Rows of quartz and granite slabs standing in vertical racks in a dim warehouse
Fig. 04 Slab racks — Knoxville shop
Close view of a veined granite slab standing upright in a steel rack, its movement running across the polished face
Fig. 05 Granite — one-of-a-kind movement

  • Quartz

    Engineered — consistent movement

    Dense and non-porous, with a pattern that repeats predictably across a run. The practical choice for busy kitchens and bathroom vanities.

  • Granite

    Natural — one-of-a-kind movement

    Cut from the earth, so no two slabs match. We lay your template out on the actual slab before cutting so the movement lands where you want it.

  • Remnants

    Offcuts — smaller projects

    Pieces kept back from completed jobs, sized for laundry counters, bar tops and bath vanities — real stone without ordering a full slab.

Slab and fabrication quoted together, per square foot

04 — Consult

Bring us your measurements.

You do not need a finished plan to start. Rough numbers and a photograph of the space are enough for us to talk slabs, edges and what the job takes.

  • Rough dimensions of your countertops
  • Sink and faucet model, or the cutout sheet
  • The edge profile you like the look of
  • Appliance openings and where you would accept a seam

Knoxville, Tennessee — template, fabrication & installation

Consult request

Kitchen / Bath / Remnant

We will follow up to schedule a template.