Detailing · Paint correction · Ceramic coating Austin, TX · Auto / RV / Powersports

We don’t just clean.
We correct.

Interior and exterior detailing, paint correction, ceramic coating and headlight restoration — for cars, RVs and powersports in Austin, Texas.

Macro view of black paint under inspection light showing fine swirl marks
Fig. 01 — Clear coat under inspection light Raking light · macro
Services

Interior & exterior detailing · Paint correction · Ceramic coating · Headlight restoration

Vehicles

Auto, RV and powersports — from the daily driver to the weekend machine.

Area served

Austin, Texas and the surrounding area.

Diagnosis

Under the light, everything shows.

In flat indoor light, tired paint can still pass. Run a bright inspection light along the panel and the swirl marks, oxidation and water spots show up straight away. What we find decides what the paint actually needs — and nothing else.

Dull car paint with swirl scratches and water spot etching under raking light
Before

Swirl marks, micro-marring and etching across the clear coat.

Freshly corrected gloss black paint reflecting inspection light in a mirror finish
After

Corrected, refined and ready for protection.

  • 01

    Swirl marks

    Fine scratches in the clear coat, usually picked up from washing, that scatter light and kill depth.

  • 02

    Oxidation & dulling

    Sun exposure breaking down the top layer of the finish until the paint reads flat and chalky.

  • 03

    Water spots

    Minerals left behind by rain or hard water, baked in until they bite into the surface.

  • 04

    Hazy headlights

    Sun-degraded lens plastic that cuts output and lets the whole front end down.

Process

Five stages. No shortcuts.

The order matters as much as the work. Correction only holds if the surface is genuinely clean, and protection only lasts if it goes on corrected paint. Here is the sequence every vehicle goes through.

01

Inspection

Paint is checked panel by panel under inspection light. The correction stage is decided before a machine touches the car.

02

Decontamination

A careful wash, chemical decontamination and clay treatment to strip bonded fallout, tar and industrial residue from the surface.

03

Paint correction

Machine polishing in stages, from cutting to refining, to remove defects and bring back clarity and gloss in the finish.

04

Ceramic coating

A protective layer applied panel by panel over corrected paint, then left to cure so it bonds properly to the surface.

05

Final check & handover

The finished vehicle is re-inspected under the same light it was checked under, then walked through with you before it leaves.

Services

Five services, one standard.

Pick the outcome you are after and we will tell you honestly what it takes to get there. Every job is scoped with you before any work starts.

Not sure which one you need? Send us a photo of the paint in daylight and we will point you at the right service before you book. We work on cars, trucks, RVs and powersports.

Portfolio

Documented work.

Every vehicle that leaves the bay is photographed under the same light it was checked in — so the difference is visible, not described.

Booking

Book a detail.

Tell us what you drive and what is bothering you about the finish. We will come back to you with what the job involves and a time to bring the vehicle in.

  • 01

    Send us your vehicle and the service you are considering.

  • 02

    We reply with what the job involves and a time to bring it in.

  • 03

    Drop it off — we walk the finished vehicle through with you before you leave.

Shine Master Detailing · Austin, Texas Auto · RV · Powersports