Kalispell · Whitefish · Columbia Falls · Bigfork · Lakeside · Evergreen

Pick your bay.
We'll call you back.

Garage flake floors, metallic marble epoxy and shop coatings. One owner-operator, one direct line, quoted off your measured square footage.

Plan view of a two-car garage marked out in bays 01 and 02 TWO-CAR FOOTPRINT · PLAN VIEW 01 02 OVERHEAD DOOR
01 Garage Flake Floor System

Full flake broadcast. Sealed gloss.

Dense colour flake scattered over a graphite base, locked under a clear topcoat. It covers the oil spots, the tire marks and the hairline cracks, and it holds a tight, even texture underfoot when the snow melts off the truck.

  • Two-car footprint, quoted from your measured square footage
  • Flake blend chosen before we start — copper, graphite, or your own mix
  • Sealed with a clear topcoat so the gloss stays put under tires
Starting $2,150 / 2-car
Finished flake epoxy floor in a two-car garage
Flake system · cured and sealed
02 Metallic Marble Epoxy

Poured metallic. Moves with the light.

Pigment poured and worked across the slab so copper and charcoal pull into each other and set where they land. No two floors match, because the pattern is decided on your floor, on the day.

  • Metallic pigment blended and worked on site
  • High-gloss clear topcoat over the marbled base
  • Best on a sound slab — we look at it before quoting
Starting $4,200
Metallic marble epoxy being spread across a garage floor
Metallic pour · in progress
03 Shop & Commercial Coating

Built for traffic and dropped steel.

For working shops, service bays and commercial floors where the coating has to take a beating and still sweep clean. Tighter finish, tougher build, sized to the square footage you actually run.

  • Priced per square foot, measured on site
  • Hard-wearing surface for tools, jacks and daily traffic
  • Same shop-floor look as the residential bays, higher build
Starting $5.50 / sq ft
Coated floor inside a commercial workshop
Shop coating · commercial bay
04 Service Area
Residential garage with the door open in the Flathead Valley
Flathead Valley · residential bay

We run these six towns.

The truck stays in the valley. If you're inside this list, the direct line is the fastest way to get a quote started — square footage and a couple of photos of the floor is all it takes.

Kalispell Whitefish Columbia Falls Bigfork Lakeside Evergreen

Or skip the form — call the direct line and we'll tell you straight away.

05 Order of Work

Call, measure, quote, coat.

01

Call or text

Ring the direct line or send a text. Tell us the town and whether it's a garage, a shop or both.

02

Send the size

Square footage, and a few photos of the slab. That's enough for us to price it properly.

03

Quote and pick flake

You get a number and a flake or metallic blend. Nothing gets mixed until you've said go.

04

We coat the bay

Floor prepped, coating laid, topcoat sealed. You park on it when we tell you it's ready.

The number rings the owner.

One line, one operator, six towns in the Flathead Valley. Call or text and we'll get your bay measured and quoted.

(555) 014-2290