HarborlightMakers 3D
(555) 014-2290 Book a time
Layer 01 — Book a time

Portland, Maine · 3D printing studio

Start with asingle layer.

Harborlight Makers 3D is a working print studio in Portland, Maine. Pick a slot on the studio calendar, bring the file you want to make, and we'll get you from a first layer to a finished part.

  • Onboarding $65
  • Open session $45
  • Membership $120/mo
  • Kids' workshop $35
Book a time Call (555) 014-2290

Serving Greater Portland, South Portland, Falmouth, Scarborough and Cape Elizabeth

A desktop 3D printer seen from the side, mid-print, laying coral filament onto the build plate in a dim workshop
Fig. 01 — the bench, mid-print

Open slots · this week

Mon 13:30 Tue 10:00 Thu 10:00 Sat 09:30

Booking runs through one studio calendar See the week

Layer 02 — How it works

Booked in
three steps.

Onboarding, open print sessions, kids' workshops and membership sessions all run through the same studio calendar. Choose a time, bring what you're making, and take the bench.

  1. 01

    Pick your time

    Open the studio calendar and take any gap that suits you — printer onboarding, an open print session, a kids' workshop, or one of your membership sessions.

  2. 02

    Bring your file

    Bring a finished model or just an idea. Onboarding walks you through the printer and the slicing software, and what makes a first layer hold instead of lift.

  3. 03

    Run the print

    Load the plate, start the job and watch the layers stack — an hour at the machine on your first visit, or three hours at the bench in an open session.

A maker's hands lifting a finished 3D printed part off the build plate of a printer in a dark studio
Fig. 02 — off the plate
Layer 03 — Sessions & pricing

Four ways to
book the bench.

Prices are per booking, and every one of them is reserved through the studio calendar. Pick the session that matches what you're making — you can change your slot later.

Finished 3D printed objects and stacked filament spools on a shelf in a dark studio
Fig. 03 — off the shelf
60 min One-hour printer onboarding An hour at the machine with someone who knows it — the printer, the slicing software, and a first layer you can watch land. $65 Book a time 3 hours Three-hour open print session Three hours of open bench time on the studio printers. Bring a file, start your print, and stay for the layers. $45 Book a time Monthly Monthly studio membership A monthly seat at the bench for $120. Book your sessions through the same calendar as everyone else, month after month. $120/mo Start a membership Workshop Kids' intro to 3D printing A hands-on workshop for young makers: what a printer is actually doing, how each layer lands, and a turn at the controls. $35 Book a workshop
Layer 04 — Availability

Every open gap
is a booking.

Booked time shows solid; open time is a slot you can take. Tap any open slot below and it's yours — the same week, the same bench, whichever session you picked above.

Mon
10:00 13:30 16:00 18:30
Tue
10:00 13:30 16:00 18:30
Wed
10:00 13:30 16:00 18:30
Thu
10:00 13:30 16:00 18:30
Sat
09:30 12:00 14:30 16:30
Open — tap to book Already booked
Children gathered around a workbench in a dim studio, watching a small 3D printer build a model
Fig. 04 — young makers at the bench

Kids' workshop

Intro to 3D printing, for young makers.

A short, hands-on session built for kids: what a 3D printer is actually doing, why the layers matter, and how a file becomes a solid object. Parents are welcome to stay.

$35 · booked from the same calendar

Book a workshop
Layer 05 — Membership
Two makers working at a bench beside running 3D printers in a dim studio workshop
Fig. 05 — the studio, in session

Monthly studio membership

A standing seat
at the bench.

$120 / month

A membership holds a place in the studio calendar for the month. Book your sessions the same way everyone else does — through the studio calendar — and keep a project moving instead of starting over every visit.

  1. 01Start a membership — $120 a month.
  2. 02Book each session from the studio calendar.
  3. 03Come in and keep the project moving.
Start a membership See open slots
Layer 06 — Book your session

Book your session.

The calendar is open. Take a slot and we'll have the bench ready — filament loaded, plate clean, first layer waiting.

(555) 014-2290
Book a time Call the studio

Greater Portland · South Portland · Falmouth · Scarborough · Cape Elizabeth