Caprock Welding Works Amarillo, Texas Start a request

Mobile welding & repair · Amarillo, Texas

Built to swing true and latch tight.

Hinges, latches, posts, and frames are the parts that hold a gate, a pen, or a trailer together under daily use. When one of them quits, we load the rig and come put it right.

Start a repair request See what we weld
  • Mobile rig We come to the ranch, the lot, or the yard.
  • Trailers & frames Straightened, welded, and braced back up.
  • Gates & pens Built to the opening you already have.

The ledger · six line items

What we get called out for.

Everything on this list comes down to the same thing: a part that used to hold, swing, or shut no longer does. Here is what we take on, and what it usually means.

A flatbed trailer tongue on a shop floor with a cracked weld ground back and fresh beads laid in
Trailer and frame work.
  1. 01

    Mobile welding

    We bring the rig to the ranch, the lot, or the shoulder of the road. If it will not move, we come to it.

  2. 02

    Trailer and frame repair

    Cracked tongues, bent rails, broken welds, sagging decks. Straightened, welded, and braced so the deck rides flat again.

  3. 03

    Pipe welding

    Fence line, corral, and waterline pipe. Fit-up, root, and cap run on site, so nothing has to be hauled in to get it joined.

  4. 04

    Aluminum TIG

    Clean, controlled TIG on aluminum for light frames, gates, and equipment where a hot fast pass would do more harm than good.

  5. 05

    Ranch equipment repair

    Feeders, squeeze chutes, loaders, and implements that quit in the middle of a job. We look at what broke and what caused it.

  6. 06

    Custom gates and pens

    Built to the opening you have, hung to swing clear of the ground, and latched where a hand in gloves can reach it.

Shop drawings

Gates and pens built as assemblies, not products.

A gate is not a panel you drop in a hole. It is a frame, a set of hinges, a latch, and a post line that all have to agree with each other. We build to the opening that is already there, so it hangs square and stays that way.

Gate elevation — post line, hinge points, latch and strike.

  1. 01

    Measure the opening

    We fit the gate to the posts you already have, so it hangs square the first time instead of the third.

  2. 02

    Build the frame and panel

    Tube frame, pickets or mesh, welded out and dressed so there is nothing left to catch a sleeve on.

  3. 03

    Set the hinges

    Hinge placement set to your post line, so the gate swings clear and does not drag a rut under itself.

  4. 04

    Hang, swing, and latch

    Latch and stop land where a hand in gloves can reach them, and the gate closes against its own frame.

A finished steel tube gate hung between two weathered wooden posts on a ranch
Custom gate, hung and latched.

Mobile calls

Tell us what is dragging, sagging, or will not shut.

Most of the work happens where the problem is — a corral gate that scrapes, a trailer that needs to leave tomorrow morning, a pipe joint that let go out on the fence line. Give us the location and what is wrong, and we will tell you what it takes.

  1. 01

    Send the form

    Tell us what broke and how it is behaving — dragging, sagging, cracked, or just not shutting.

  2. 02

    Tell us where it sits

    Ranch, lot, or cross streets. Enough for us to find the gate, the trailer, or the pipe run.

  3. 03

    We bring the rig out

    Welding and cutting equipment comes to the job, so nothing has to be loaded and hauled into town.

A welding rig pickup parked on a dirt road beside a corral fence with leads running out to a repair
Close view of TIG welding on an aluminum frame with gloved hands steadying the torch
Out on the job, and back at the bench.

Repair request

Start a repair request.

Send the details and we will get back to you about a mobile visit. The more you can tell us about the location and what is wrong, the faster we can get out there.

Area served
Amarillo, Texas and the surrounding ranch country.
What to include
Where it sits, what it is, and whether it is still in service.
Prefer to talk it through?
Leave your number and the best time to call, and we will phone you.
We reply between jobs.