Bright Meadow Solar Fresno, California Get a quote

Residential solar · Fresno, California

One street.
A whole lot of sun.

We all get the same sun out here. What differs is the roof under it. Bright Meadow puts solar on Fresno roofs, block by block, until the whole neighbourhood is making its own.

Get a quote Book a consultation
Roof-mounted arrays Battery storage Cleaning & monitoring

The block, stop by stop

Pan across the street.

Four roofs, four jobs. Keep moving sideways — the patch fills in as you go.

Drag sideways

01 · The roofs

Roof-mounted arrays

We start where the sun already lands. Panels sit low on the slope you have, laid out around vents, valleys and the walkways you still need.

We all get the same sun out here. What differs is the roof under it.

02 · The wash days

Solar panel cleaning

Valley dust is patient. A rinse and a soft brush clear what settles on the glass, so the array keeps doing the job it was sized for.

Out here, a clean panel is just a roof that's paying attention.

03 · The quiet box

Battery storage

The middle of the day gets saved for the end of it. Your battery sits on a garage wall and takes over in the evening, without a sound.

Afternoon sun, kept for after dinner. That's the whole trick.

04 · The watching

System monitoring

Somebody here is always looking at the numbers and the sky. If a patch starts to slip, we see it and we call you — not the other way round.

A whole street's worth of roofs is easier to look after than one.

Aerial view of a Fresno residential block at golden hour with solar rooftops
Plan view of a Fresno block: wide lawns, low roofs, palms, and a long afternoon of sun landing on all of it. Same sun, every roof

What we do

What a block needs.

Six things, done properly, in the order that makes sense for the house. Start anywhere — most people start with one and grow into the rest.

01

Residential solar installation

A system designed around your roof, your shade and the way your household actually uses power through the day.

02

Roof-mounted arrays

Panels fixed to the roof you already own, laid out to keep the pitch, the vents and the walkways clear.

03

Battery storage

Store the middle of the day for the end of the day, so the house keeps running after the sun has gone off the roof.

04

Solar panel cleaning

Dust, pollen and the occasional bird. A proper wash keeps the array producing what it was sized to produce.

05

System monitoring

We keep an eye on production and flag anything that starts to drift, before it becomes a month of lost sun.

06

Home energy audits

Before we talk hardware, we look at how the house spends its power — where the heat gets in and what runs at night.

On the roof Installers fitting a solar panel onto a roof-mounted rail
An array going up on a low-slope Fresno roof. Rails first, then the panels, then the walk-through with the homeowner.

Start here

The audit comes first.

Solar is arithmetic on top of a house. We'd rather get the house right first, then size the array to the result rather than to a guess.

01

We walk the house

The roof, the shade across it, the attic, the garage wall, and the way the place breathes in July.

02

We size it to you

Your usage, your roof and your goals get turned into a system that fits the house — arrays now, storage when it suits.

03

We stay on it

The array goes up, the monitoring starts, and cleaning and check-ins keep the output where it should be.

A block only works if every roof on it is actually doing its job.

During an audit Technician inspecting a home during an energy audit
Where a good system starts: outside, on a warm afternoon, with someone actually looking at the house.

Get a quote

Tell us about your roof.

Send the basics and we'll come back with a proper quote — no pressure and no sales script. If a consultation suits you better, book one of those instead.

We'll only use these details to put your quote together.