Basalt Sign & Fabrication Request a quote Quote
Routed metal panel face lit hard from one side in the fabrication shop

Reno, Nevada — Architectural sign fabrication

Signs cut from the high desert.

Channel letters, monument signs, CNC routing, powder-coated frames, LED retrofits and permit-ready installation — fabricated in Reno for general contractors and property managers.

Request a quote See the services
Fabricated in Reno, Nevada Channel letters · Monument signs · CNC routing · Powder-coated frames · LED retrofits · Permit-ready installation

Services

Six scopes, cut on one shop floor.

Every scope below runs through the same shop: material picked for exterior exposure, cuts held to the drawings, and mounting worked out before anything is loaded for the site.

Powder-coated frames hanging on a finishing rack
Finishing line — powder-coated frames
01

Channel Letters

Faces, cans and returns built as one assembly, with the backing and wiring laid out before the letters ship.

Exterior
02

Monument Signs

Base, cladding and panel fabricated as a single unit, sized to the site plan and the load path at the wall.

Ground-set
03

CNC Routing

Panels cut to your files, tolerances held to the drawings, edges cleaned and squared before finishing.

Cut shop
04

Powder-Coated Frames

Color and finish applied as a controlled system, so the frame reads the same from every approach.

Finish
05

LED Retrofits

Existing cabinets opened, lighting rebuilt and wiring brought up to current code before the face goes back on.

Rebuild
06

Permit-Ready Installation

Shop drawings and documentation prepared for the permit package, then the sign is set and connected.

Field

Material

Raw stock in. Finished sign out.

Cut edges, returns and mounting points are worked the way the drawing calls for, because the sign has to hold its face against high-desert sun, wind and freeze-thaw long after the punch list is closed.

Stacked aluminum sheets and steel stock in the fabrication shop
Raw stock — sheet, tube and extrusion

Three moves that decide how a sign ages outdoors

  • 01

    Cut

    Panels routed to your files and squared to the elevation, with tolerances held through the whole run.

  • 02

    Return

    Returns formed and joined so the letter keeps its shape, its depth and its shadow line.

  • 03

    Mount

    Mounting points laid out from the site plan up, not improvised once the crew is on the wall.

A finished dark monument sign installed at the edge of a commercial lot
Finished work — monument sign, set and lit

Process

One cut line, quote to install.

Five steps
Fabricated and finished in Reno

Step 01

Request a quote

Send the scope, the quantity and the site conditions. We come back with questions or a number.

Step 02

Shop drawings

Sizes, mounting and electrical resolved on paper and prepared for the permit package.

Step 03

Fabrication

Routing, forming and assembly run from the same drawings released for the job.

Step 04

Finish

Powder coating and lighting applied as one system, then inspected before anything is wrapped.

Step 05

Install

The sign is set, the connections made, and the field work closed out on your schedule.

CNC router cutting an aluminum sign panel on the shop floor
In the shop — routing to the drawing Reno, Nevada

Request a quote

Tell us what the sign has to do.

Contractors and property managers: send the scope and we will work the rest out with you — material, mounting, electrical, and what the permit package needs.

  • 01

    Fill in the ticket with the sign type and the site. Dimensions, quantity and site conditions help if you have them.

  • 02

    We review the scope against how it will be built, mounted and wired, and come back with questions or a number.

  • 03

    Once it is agreed, drawings are prepared and the work moves onto the shop floor.

Request-a-cut ticket Basalt / Reno NV

Drawings, elevations and photos can follow once we are in touch.